OTC Observer Inc reaching out to the masses keeping investors and shareholders up to date on company news and bringing transparency to the undervalued, undersold, micro-cap stocks of the market

Sponsored Financial Content

IDM Mining Intersects 15.52 g/t Au and 44.82 g/t Ag Over 15 Meters True Width and Discovers New NK Zone at the Red Mountain Gold Project


IDM Mining Intersects 15.52 g/t Au and 44.82 g/t Ag Over 15 Meters True Width and Discovers New NK Zone at the Red Mountain Gold Project 

 IDM Mining Ltd.(TSX VENTURE:IDM) ("IDM" or the "Company") is pleased to announce assays from an additional 13 underground core holes completed at the Red Mountain gold project ("Red Mountain" or the "Project"), located 15 km east of Stewart, BC. These results are from the ongoing Phase I drilling program. This program is focused on infill and step-out drilling in and around the current resource at Red Mountain, as well as to collect material for metallurgical, geotechnical and hydrological testwork.
 
Highlights from the recent underground drill results include:
 
U16-1181: 13.77 meters true width at 5.72 g/t Au and 34.89 g/t Ag; south Marc Zone step-out
U16-1185: 14.19 meters true width at 5.78 g/t Au and 24.15 g/t Ag; up-dip Marc Zone step-out
U16-1187: 6.00 meters true width at 7.43 g/t Au and 12.51 g/t Ag; new NK Zone discovery
U16-1193: 15.0 meters true width at 15.52 g/t Au (capped) and 44.82 g/t Ag; Marc Zone infill and metallurgical hole
The NK Zone discovery was encountered in drill hole U16-1187, a vertical hole to test a projected step-out of isolated, historic intercepts below the Marc Zone. It intersected a mineralized interval of massive, coarse grained pyrite veins and stockworks averaging 7.43 g/t Au and 12.51 g/t Ag over 6.0 meters true width. Mineralization occurs at a sediment/porphyry contact, approximately 100 meters below the underground workings. This style of mineralization is consistent with the Marc/AV/JW resources; projected from wide-spaced intervals from adjacent sections, the NK Zone is sub-horizontal and tabular, and open for expansion in all directions. The NK Zone is 70 meters outside of the current resource estimate at Red Mountain, and named after Assistant Project Manager, Natalie King.
 
"In addition to the successful step-out holes to the south of the Marc Zone, the discovery of the NK Zone has significant potential for resource growth and highlights the many exploration opportunities at Red Mountain," said Robert McLeod, President and CEO of IDM Mining. "Future drilling will target potential resource expansion from these wide and high-grade intercepts at the Marc and NK Zones as well as several other untested targets."
 
Drill holes U16-1180 and 1181 were drilled up-dip from previously reported U16-1182, which encountered 6.30 meters averaging 9.91 g/t Au and 53.52 g/t Ag. Hole U16-1180 intersected 13.0 meters true width averaging 3.86 g/t Au and 26.15 g/t Ag; hole U16-1181 intersected 16.2 meters true width averaging 5.72 g/t Au and 34.89 g/t Ag, including 8.28 meters true width averaging 9.15 g/t Au and 45.49 g/t Ag. These holes are southerly step-outs from the current Marc Zone resource. Historic surface holes located further south of these intercepts were collared too far to the west and consequently did not intersect mineralization, suggesting the Marc Zone remains open for expansion to the south and underneath the underground ramp.
 
On section 1150N, drill hole U16-1184 was a down-dip step-out of the Marc Zone and intersected a narrow interval of gold mineralization, whereas U16-1185 was an up-dip step-out from the resource, and intersected 16.69 meters averaging 5.78 g/t Au and 24.15 g/t Ag, including 5.69 meters averaging 10.01 g/t Au and 39.60 g/t Ag.
 
On section 1125N, drill holes U16-1183 and 1186 were down-dip step-outs of the Marc Zone tail; U16-1183 intersected two separate 0.8 meter true width intervals of 8.56 g/t Au and 6.78 g/t Au respectively, and U16-1186 intersected 1.0 meter averaging 19.05 g/t Au and 33.50 g/t Ag.
 
Drill holes U16-1190 and U16-1191 were up-dip resource expansion holes on section 1200N. U16-1190 did not intersect significant mineralization, potentially due to a fault-window from a minor, cross-cutting fault. Drill hole U16-1191 intersected 5.64 meters averaging 5.23 g/t Au and 39.65 g/t Ag (cut), which included a 0.30 meter assay averaging 115.5 g/t Au and 615 g/t Ag (cut to appropriate grade caps).
 
Drill holes U16-1188, 1192 and 1193 are infill holes in the Marc Zone, with additional data collected for metallurgical and geotechnical purposes. The 2016 metallurgical holes target representative mineralization at Red Mountain from each of the defined resource zones, spatially distributed throughout the deposit, including narrower tail zones (such as the mineralization encountered in U16-1192). Of significance, U16-1193 intersected 15.0 meters true width averaging 15.52 g/t Au (cut) and 44.82 g/t Ag.

Complete results are as follows:

Hole-ID
SectionFrom
(m)
To
(m)
Length
(m)
True
Width
Au
(g/t)
Ag
(g/t)
Au
(g/t)

*uncut
Ag
(g/t)
U16-11801075N42.0055.0013.0013.003.8626.15  
U16-11811075N33.8050.0016.2013.775.7234.89  
including 41.7250.008.287.049.1545.49  
U16-11831125N39.0040.001.000.808.566.03  
and 63.0064.001.000.806.789.31  
U16-11841150N70.0071.001.000.804.031.50  
U16-11851150N26.0042.6916.6914.195.7824.15  
including 37.0042.695.694.8410.0139.60  
U16-11861125N44.0045.001.000.8019.0533.50  
U16-11871125N107.00113.006.006.007.4312.51  
including 110.08113.002.922.9213.2820.89  
U16-11881200N23.0027.504.504.509.4017.30  
U16-11891200N62.0063.001.000.703.975.19  
and 81.0082.001.000.704.170.21  
U16-11901200NNo significant assays     
U16-11911200N24.8430.485.645.085.2339.658.4560.66
U16-11921250N30.4831.300.820.823.331.01  
U16-11931250N35.0050.0015.0015.0015.5244.8223.7344.82
including 36.4840.003.523.5230.2311.8665.2311.86
          
Assays capped at 55.0 g/t Au and 220 g/t Ag
** Drilled intervals estimated using approximate 3.0 g/t cut-off for underground mining
*** In many intercepts, 10 to 20 cm intervals of whole core were collected for grind and rock mechanical properties tests; these intervals were assigned a zero (0.0 g/t Au and Ag) grade during compositing.
Drill hole collar information and location maps, core photos along with sample cross sections can be viewed at www.idmmining.com.
About Red Mountain
The 17,125 hectare Red Mountain gold project is located in northwestern BC, 15 km northeast of the town of Stewart. Discovered in 1989, the property was explored extensively until 1996 by Lac Minerals Ltd. and Royal Oak Mines Inc., with 466 diamond drill holes and over 2,000 meters of underground development completed, along with extensive engineering and environmental baseline work. Additional studies were completed over the past 12 years by Seabridge Gold Inc., North American Metals Corp. and Banks Island Gold Ltd.
On April 4, 2016, the Company announced an updated mineral resource estimate reported at 3.0 g/t Au cut-off for the Red Mountain gold project.
ClassificationTonnageAuAgOz AuOz Ag
  (g/t)(g/t)  
Measured847,2009.3834255,400920,700
Indicated794,6007.2918186,100459,100
Measured + Indicated1,641,8008.3626441,5001,379,800
Inferred548,1006.109107,500153,700
Red Mountain is a porphyry-related hydrothermal gold system, located in the Stikine terrain. Gold mineralization is associated with, and partially hosted within an early to mid-Jurassic multi-phase intrusive complex, with associated volcanic and volcaniclastic rocks and sediments. Many gold mineralized zones occur on the property, including five mineralized zones with established resource estimates. The five mineralized zones (Marc, AV, JW, 141 and 132) have been folded, and are often separated by dip-slip fault zones. The mineralized zones vary in orientation from shallow to steeply dipping and are generally tabular. The Marc, AV and JW Zones vary in widths from one to forty meters, averaging about fifteen meters in thickness. Gold and silver mineralization is associated with stockworks, disseminations and patches of coarse grained pyrite, surrounded by a pyrrhotite/sphalerite halo. Alteration facies includes strong quartz-sericite alteration.
Additional information, including the Company's NI 43-101 Technical Reports for the Red Mountain gold project, is available at www.idmmining.com and at www.sedar.com.

No comments:

Post a Comment

Advertisement